![]() ![]() Once the new battery was fitted, It was noted the top side of laptop went back to normal, now fully closes just like factory. With Tri-Wing Driver supplied, the screws holding him in removed. The packs are at bursting pressure, the slightest mistake rupturing them will destroy everything. Removing the battery at this point, now exposed was even a bit risky. When the drilled head came off, the lid sprung open like a broken truck spring. The screw up the side, was smartest choice first, relieving most of the tension from front edge screws. Now the only option now is remove screw head by drilling it off.Īs Aircraft mech, this is typical removing frozen screws, to remove panels. The Tension of battery pushing on Cover was incredible. Gradual swelling of topside and trackpad.Īt every check of system Status - the Battery always showed Good - Yea Right the Bottom Cover Off is now a Brutal Process.Īs good as #zero phillips that was supplied, barring down with both hands, the last 4 screws would not budge.ġ up the side, near the battery & 3 across front edge. The lid also stopped short of closing with a 3/8" of an inch gap. My early 09' MBP 13" I was terrified seeing the bottom case had ruptured out by a good 3/8" of an inch, near the front LEFT corner and viewing edge of ruptured battery. In my case - It was a Very very Serious Crisis. ![]() As Also makkhayon noted - I'm Quite Happy. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |